Galvanized Steel Plank Selection And Procurement Guide From Manufacturers

Galvanized steel plank is a kind of construction equipment that is widely used in the shipbuilding, oil platforms, and electricity industries. 

 Steel plank manufacturers vary a lot, and there are also many differences between cold galvanized and hot galvanized, then product selection becomes an important part. What should we do when choosing steel plank manufacturers?

steel planks.jpg

1. Raw Materials

Hot-dip galvanized steel plank is made of carbon steel plate with a thickness of 1.2-2.0mm. The negative tolerance of the material is generally within five wires. 

 2. Production Process 

A qualified steel plank has its design concept reflected.  For example, some steel plank series are mainly for the shipbuilding, and ship repair industry. The construction requirements of the shipyard are high, especially to operate in the sandblasting workshop, the two-side closed steel pipe process is set up to achieve better anti-sand effect, and the surface concave and convex holes are designed to have a better waterproof effect in addition to anti-slip in coastal operations. After the previous generation of products, galvanized steel plank manufacturers aimed at the requirements of different customer groups in the market, and innovative development of the second generation is not only suitable for the shipping market but also suitable for construction, and oil platforms. The design concept of the new cost-effective hot-dip galvanized steel board is non-slip, strong, and firm.

 3. Welding Requirements

The fastness of steel plank is not only related to the process but also the welding. Embedded welding is first to ensure the overall stress point of the steel planks. Secondly, the length of each welding point should be guaranteed to be at least 1.5 cm, and the surface should be smooth.

 ADTO steel plank products are fully able to stand the test of the market and users. In addition to the above features, the service life of hot-dip galvanized steel scaffolding planks can reach 6-8 years with proper use and maintenance.

评论

发表评论

此博客中的热门博文

The Comparison of Different Scaffolding Planks

图片
  Comparison of advantages: Wooden scaffolding planks 1.  Easily stack and transport. Wooden planks are strong and they stack easily when in transport. 2.  Less expensive than steel scaffolding planks. Many scaffolding purchasers and scaffolding rental agents use the wooden scaffolding planks as they are significantly less expensive than a steel purpose-built scaffolding working platform. 3.  Anti-slide. Some workers prefer the use of the wooden planks since the steel platforms are often slick and tend to slide on the steel tubing of the scaffold sections. Scaffolding steel planks 1.  Convenient for transport. Scaffolding steel planks are made in the same specifications. Which can be transported easily. 2.  Long service life. Five to eight years cycle using. Scaffolding steel planks have a longer service life than wooden scaffolding planks which are easy to be corrosive. Wooden scaffolding planks are usually scrapped after its one-time use. 3.  Time-saving and labor saving. Easy to ere
阅读全文

What Are the Advantages Does Cuplock Scaffolding Have?

图片
  Cuplock / Cup lock  is a unique node point connection device that allows up to four horizontal members connected to the vertical members without the use of nuts and bolts or wedges. The locking device is formed by two cups. Single node point action of unique locking makes 'Cuplock/Cuplock' a fast, versatile and optimized system of scaffolding for construction, demolition and maintenance projects throughout the globe. #1 Low maintenance. #2 Lightweight but high loads carrying capacity. #3 Cuplock systems- Versatile. Best suitable for access or formwork support. #4 Easy to erect - say no to nuts and bolts or wedges. Just a simple locking cup at each node point on the standards enables connection of the ends of up to four members in one locking action. #5 Cuplock systems- Timely tested and Proven design with safety accessories. Cuplock System has a proven performance history on an extensive number of sites, meeting the requirements of the various statutory bodies. #6 Quick faste
阅读全文

ADTO Aluminum Formwork Project Case: Zhonghai Mingting Project

图片
In the Zhonghai Mingting project,  ADTO  Aluminum  Formwork  provided aluminum  f ormwork  rental, aluminum  f ormwork  first assembly and on-site technical service support for the entire project. From the on-site view, the building's  mold ing effect is not only smooth but also well-formed. The walls, beams, columns, and floor surfaces have excellent appearance, good verticality, and horizontality. The overall effect is better than other similar products, which provides strong support for the smooth progress of the project. , and also laid a solid foundation for the successful delivery of the project.   ADTO  Aluminum  Formwork  (Hubei  ADTO  Aluminum Alloy  Formwork  Manufacturing Co., Ltd.) is the core business unit of  ADTO  Group. As a provider of excellent engineering aluminum  f ormwork s, it is committed to providing customers with aluminum  f ormwork  design, production and processing, leasing, labor services, One-stop service such as secondary  f ormwork  matching. The co
阅读全文