What are the Requirements For Galvanized Scaffolding Steel Planks?

 The Galvanized Scaffolding Steel Plank is widely used in scaffolding systems and formwork systems for supporting construction materials and construction workers. 

We also call scaffolding steel planks scaffolding steel boards, steel boards, scaffolding catwalk planks, etc. 

The galvanized scaffolding steel plank has advantages of fire resistance, sand accumulation, lightweight, high compressive strength, an I-shaped design on both sides, and other features.

gi plank.jpg

The Requirements For Galvanized Scaffolding Steel Planks

Galvanized Scaffolding Steel Planks play an important role in construction industries, so their quality must be strictly controlled during the production process.

The surface of the scaffolding steel board must be flat, and the deflection should not exceed 5.0mm. The triangle-shaped groove with better stability is selected on the board's surface, which is more planned than the third-generation hot-dip galvanized trapezoidal groove. It is more resistant to compression and stability.

Put the steel planks on the standard plane, the blind corners of the four corners of the board are staggered, and it should not exceed 5.0mm.

The burrs at the edge of the steel platforms must be cleaned.

The back of the scaffolding steel boards is embedded with a slotted stiffening rib every 500~700mm. The stiffener distance error of the steel boards should not exceed 0.5mm, and the endplate size error should not exceed 2.0mm.

The welds of the scaffolding steel planks must not be less than 2.0mm, and the width of the welds should not be less than 2.0mm. The length of each continuous welding seam of the stiffener should not be less than 10mm, and the welding seam should not be less than 10. The stiffening ribs are selected by spot welding. The length of the welding joint is ≥15mm, the welding joint is ≥6, and the welding seam height is ≥2mm. The welding of the endplate head should be more than 7 welding points, especially the reinforced welding on both sides, and the welding seam height is 3mm as the technical requirement.

The surface of the steel springboard should be degreasing and dedusting, and then dedusting. It is required to apply primer once and topcoat once, and the thickness of each paint film should not be less than 25μm.

Each batch of hot-dip galvanized steel sheets entering the factory must issue a raw material statement or a testing statement issued by a testing organization.

For high-quality galvanized scaffolding steel planks, Please feel free to contact us.

评论

发表评论

此博客中的热门博文

The Comparison of Different Scaffolding Planks

图片
  Comparison of advantages: Wooden scaffolding planks 1.  Easily stack and transport. Wooden planks are strong and they stack easily when in transport. 2.  Less expensive than steel scaffolding planks. Many scaffolding purchasers and scaffolding rental agents use the wooden scaffolding planks as they are significantly less expensive than a steel purpose-built scaffolding working platform. 3.  Anti-slide. Some workers prefer the use of the wooden planks since the steel platforms are often slick and tend to slide on the steel tubing of the scaffold sections. Scaffolding steel planks 1.  Convenient for transport. Scaffolding steel planks are made in the same specifications. Which can be transported easily. 2.  Long service life. Five to eight years cycle using. Scaffolding steel planks have a longer service life than wooden scaffolding planks which are easy to be corrosive. Wooden scaffolding planks are usually scrapped after its one-time use. 3.  Time-saving and labor saving. Easy to ere
阅读全文

What Are the Advantages Does Cuplock Scaffolding Have?

图片
  Cuplock / Cup lock  is a unique node point connection device that allows up to four horizontal members connected to the vertical members without the use of nuts and bolts or wedges. The locking device is formed by two cups. Single node point action of unique locking makes 'Cuplock/Cuplock' a fast, versatile and optimized system of scaffolding for construction, demolition and maintenance projects throughout the globe. #1 Low maintenance. #2 Lightweight but high loads carrying capacity. #3 Cuplock systems- Versatile. Best suitable for access or formwork support. #4 Easy to erect - say no to nuts and bolts or wedges. Just a simple locking cup at each node point on the standards enables connection of the ends of up to four members in one locking action. #5 Cuplock systems- Timely tested and Proven design with safety accessories. Cuplock System has a proven performance history on an extensive number of sites, meeting the requirements of the various statutory bodies. #6 Quick faste
阅读全文

ADTO Aluminum Formwork Project Case: Zhonghai Mingting Project

图片
In the Zhonghai Mingting project,  ADTO  Aluminum  Formwork  provided aluminum  f ormwork  rental, aluminum  f ormwork  first assembly and on-site technical service support for the entire project. From the on-site view, the building's  mold ing effect is not only smooth but also well-formed. The walls, beams, columns, and floor surfaces have excellent appearance, good verticality, and horizontality. The overall effect is better than other similar products, which provides strong support for the smooth progress of the project. , and also laid a solid foundation for the successful delivery of the project.   ADTO  Aluminum  Formwork  (Hubei  ADTO  Aluminum Alloy  Formwork  Manufacturing Co., Ltd.) is the core business unit of  ADTO  Group. As a provider of excellent engineering aluminum  f ormwork s, it is committed to providing customers with aluminum  f ormwork  design, production and processing, leasing, labor services, One-stop service such as secondary  f ormwork  matching. The co
阅读全文